PMSC-10 MACH BOX

The most suitable for aluminum powder.
It can be placed in a narrow space in an angle of 60 degrees or more.
The mach box is fitted with fine filter device which can collect aluminum powder to achieve the coolant recycling cleanly.
The structure of vertical decelerating motor direct passing design enclosed with a direct drive torsion limitation system and it is no need to increase mechanical torsion limitation system with traditional way. It is safer to operate.
It can accommodate up to 5 meters in length.

BACK TO LIST

● FEATURES ▲ NOTES

● Especially for aluminum chip.
● Significantly enhance the aluminum chip powder recycling.
● Fine chip powder can be collected by the filter mach box, and then can keep the cutting coolant clean.
▲ It is not available for dry machining process.

TYPE	MODEL
		Fine-cutting chip					Long-curly chip					Short-waved chip					Short-curly chip					Fine-cutting powder
		Aluminum	Iron	SUS	Casting	Copper	Aluminum	Iron	SUS	Casting	Copper	Aluminum	Iron	SUS	Casting	Copper	Aluminum	Iron	SUS	Casting	Copper	Aluminum	Iron	SUS	Casting	Copper
SCRAPER TYPE	PSC-2050	◎	※	※	※	※	○	※	※	※	※	○	※	※	※	※	○	※	※	※	※	◎	※	※	※	※

◎ Optimum ○ Very suitable △ Please contact us to discuss X Not suitable ※ Please contact us if not aluminum.

Model	PMSC-10
Reducer	0.4kw 1/2HPx4p 220/380V (50/60Hz)
Ratio	1/200
Converyor Chain	C2050 Pitch = 31.75
Speed of Conveying	1.8m/min(50Hz) 2.2m/min(50Hz)
Safety Device	Torsion limitation motor
Scrape Board Device	Chain from the one every six (H=50)
Fine board device	Chain from the one every eighteen (H=20)
Mach box	500mm(one/500mm)/one

H / C (mm)	700 / 815	800 / 875	1000 / 990	1100 / 1045	---
A / B (mm)	1200 / 1227	1300 / 1327	1400 / 1427	1500 / 1527	1600 / 1627
W / V (mm)	300	350	400	---	---

The size of C is determined by the size of H.
H/C, A/B, and W/V can freely mix and match. Please inform of us your indicated size to let us use it as a reference.
We reserve the right to change specific actions without prior notice.
It is needed to discuss the special specification.

Information

No.92-2, Guangqi Rd., Shengang Dist., Taichung City 429, Taiwan (R.O.C.)
TEL: 886-4-2525-2052
FAX: 886-4-2528-4500
E-Mail: brian@ju-sheet.com.tw